Can you split ethernet line

Connect to the second splitter to revert back to two cables before reaching a switch, or a router, or a computer or what have you. That said, considering how cheap ethernet switches are these days, that might actually be the best way to go. It really depends. You get more ports, maybe more speed maybe , and these days this is pretty cheap. Maybe the same or cheaper than going the splitter route, depending on which one you get.

Check back soon for specific recommendations on both cost effective and performance options. Ethernet cables and splitters are pretty inexpensive, easy to use, don't have any software to setup, and don't require a power outlet.

These are fairly cheap. The splitter comes with several drawbacks. Also, you'll need to have two ethernet ports available. We're not actually creating any more ports. All split connections with an ethernet splitter must be un-split on the other end. We're really only combining two connections into one cable at one end, then un-combining those two connections back into two physical cables at the other end.

I think that would be much more descriptive of what these things actually do. Ethernet Splitters Ethernet splitters allow users to run one cable instead of two through walls, floors, and ceilings. Ethernet Network Switches Network switches are connected to an Internet modem or router.

My Shopping List. Last Added Items. Add to Cart Add to Cart. Remove This Item. Go to Shopping List. Recent Posts. Simplifying the Many Differences among Ethernet Cables. Why Custom? Time to Get Organized with Cable Management. November October September May April Switches allow for full-duplex communication between devices, which means that data can be sent and received at the same time, resulting in a faster network.

Also read: WiFi vs. Ethernet vs. If you want to connect multiple devices, then a network cable is only one option. There are multiple methods to share the same signal between multiple devices, including some Wi-Fi options. Rather than broadcasting Wi-Fi signals from a single point, mesh Wi-Fi routers have multiple access points, sometimes called satellites.

If you regularly encounter Wi-Fi dead zones in your home or office, then you may be an ideal candidate for mesh Wi-Fi. An EOP consists of a transmitter and receiver.

Plug the transmitter into a power outlet, then use an Ethernet cable to connect the transmitter to your router. Attach the receiver to a power outlet and use an Ethernet cable to connect the receiver to your device. The EOP transmitter converts the signal in the high frequency range onto the electrical wiring, and the receiver demodulates this signal. This creates a physical connection between your Ethernet-enabled device and your router, without the need for additional wires.

Assuming you purchase compatible EOP adapters, you can set up multiple receivers around your home or office. If you have coaxial cables installed, then you could use a MoCA adapter to send Ethernet signals over your existing cabling.

This means you could potentially connect a MoCA adapter to your router and another close to a coaxial port in each room where you want to access the Internet. If you need to connect additional devices via coaxial cabling, then you may also want to use a coaxial splitter.

Now that you know the differences between an Ethernet switch, hub and splitter, you will know which one is for you. In most cases, we will recommend the Ethernet switch, as it is really the most versatile solution. By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. John is a young technical professional with a passion for educating users on the best ways to use their technology.

He holds technical certifications covering topics ranging from computer hardware to cybersecurity to Linux system administration. My router is defect. I get internet via a cable from the modem til my PC.

Before obtaining a new router, is it not possible to plug a ethernet splitter into the modem, and to put 1 cable from one of the contacts RJ on the other side to 1 PC, and 1 cable from the other RJ to the pc no 2?

The simplest among these devices is the modest ethernet splitters. Ethernet splitters are inexpensive, minuscule network devices that split one Ethernet signal into two.

These are also one of the most uncomplicated networking equipment, which does not require a power supply and no special buttons or status lights on its body. This tiny device is pretty straightforward, consisting only of three ethernet ports, two on one side and one on the other side. Some types have a short ethernet cable with an RJ45 connector on one side and two ethernet ports on the other side. The splitters have been in use in the networking space for a long time, but many can still set them up properly.

Contrary to what most people think, ethernet splitters should always come in pairs. Ethernet splitters are useful in connecting two devices in a different room from where the main signal is coming. They help save cables, network wall outlets and provide reliable connections in most cases.

As was mentioned previously, ethernet splitters come in pairs. One splitter merges two signals from a device in most cases, the router , and one unmerge the signals into two lanes, allowing two devices to be connected.

You have a router in Room A, and you have two computers in Room B, but you only have one ethernet wall jack in each room. In this case, you take one splitter, connect two cables to the router, connect the other end of the cables to the splitter, and then connect one end of the splitter to the wall jack in Room A.

This is where the two signals from the router are merged into one. As you can see, one splitter is used to unsplit two signals and another one to split them, which is why the splitters should always come in pairs. The number of cables and number of wall jacks is also reduced as there is no need to add another ethernet wall jack in each room and no need to use two cables in between these jacks.

This is just one of the simple scenarios where ethernet splitters serve their purpose best.