Can you connect a ps3 controller to a laptop

Click Install to begin the installation. After about 30 seconds, ScpToolkit will be installed, and you'll see this screen, with a big green button that says Run Driver Installer.

Since this is a fresh install, that's what we want to do. Click the button. This screen may look intimidating, but it's still pretty simple! Check the boxes for the drivers you want to install. In this case, we want to make sure Install Dualshock 3 driver is checked it should be by default. Now click the arrow next to "Choose Dualshock 3 controllers to install" to see a dropdown list of USB devices attached to your computer. Find the PlayStation 3 controller in the list and check it.

Bluetooth installation note: Make sure the "Install Bluetooth driver" box is checked. Like you did with the Dualshock 3, click the arrow next to "Choose Bluetooth dongles to install" and find your Bluetooth device in the list. Check it. Click Install. Watch the SCP Toolkit run through its installation process. You'll see lots of pop-ups on the side of your screen as it detects your hardware.

After the ScpToolkit finishes setting up, select the big green button above Run Driver Installer on the window that pops up. On the next screen, make sure the boxes next to Install DualShock 3 driver and Install Bluetooth driver are checked if you have a Bluetooth dongle plugged in.

Select the arrow beside Choose DualShock 3 controllers to install and choose your PlayStation 3 controller from the drop-down menu. If connecting a Bluetooth dongle, select the arrow beside Choose Bluetooth dongles to install and choose your Bluetooth device from the drop-down menu.

Select Install. When finished, select Exit. The ScpToolkit Settings Manager will then appear in your system tray. Select it to add another device. Once installed properly, the DualShock 3 should automatically work with the Steam client and any PC game that supports gamepads.

You may be able to adjust the control settings for individual games, but your computer will recognize the PS3 controller as an Xbox controller, so keep that in mind when adjusting the button mapping.

When you're done playing, turn off the DualShock by holding down the PS button on the center of the controller. To use your PS3 controller wirelessly, you'll either need a PC with built-in Bluetooth compatibility or a Bluetooth dongle plugged in.

You must plug in the controller before you can play wirelessly. After unplugging the controller, it should automatically sync with your PC via Bluetooth if the proper drivers are installed. But setting up wireless connectivity requires some extra steps.

By default, you can open downloaded files from within your web browser, from your "Downloads" folder. Install ScpToolKit. If the toolkit mentions that you're missing "prerequisites" needed to run the program, click Next until the prerequisites begin installing. Click Next. Click Install. Double-click the ScpToolkit Driver Installer program. It's in the file in which you installed SCP Toolkit.

It has an icon that resembles a USB cable. Uncheck the "Install DualShock 4 Controller" box. This option is on the left side of the driver installer window.

Since you're installing a PS3 controller e. Also uncheck the box next to "Bluetooth" if your controllers are wired e. A good rule of thumb here is to uncheck a box next to anything you aren't using.

If you're using Windows Vista, you'll need to check the box next to "Force Driver Installation" in the middle-left side of the window. This option is on the right side of the window. You'll select your controller from here.

You'll see a list of all devices attached to your computer e. Your PS3 controller is the option marked "Wireless Controller Interface [number] " where the number pertains to the USB port to which the controller is attached. If you're using a non-wired controller, you'll need to select the USB device you're using to facilitate the connection under the "Bluetooth" section above the "DualShock 3 Controllers" drop-down box. It's on the right side of the driver installer window.

Doing so will prompt SCP Toolkit to begin installing your controller's drivers, which should take less than five minutes on any compatible PC. Once the installation is complete, you'll hear a confirmation noise. At this point, your controller's drivers have been installed and you are ready to begin using your controller with PC games. I did everything as instructed. But at the final step on Better DS3, it did not give me the opportunity to click the Apply button.

What can I do? You have to select both profile and controller to have the ability to click Apply. Not Helpful 36 Helpful What do I do if it doesn't have a "save profile" message at the bottom of the window and I am on Windows 7? Set the size to "smaller" and you'll get logged out. Log back in, and you'll find the "Save" button. Not Helpful 18 Helpful Other than collecting dust in your shrine to now defunct and obsolete consoles, an old PlayStation DualShock 3 controller might just but what you are looking for to play new and old titles on PC, especially if the good old mouse and keyboard setup are proving tiresome.

The simple answer is that the PlayStation 3 is a controller oddity in that it had a built-in accelerometer capable of detecting motion and pressure on the analog face buttons in both three directional and rotational axes. Before you start, gather up your old PlayStation 3 controller and the mini-USB capable used to charge the controller. If not, a standard mini-USB capable goes for next to nothing over on Amazon or at any local electronics outlet.

Crammed with incredible features and a robust processing capability, Sony PlayStation 4 has turned into a gaming and on-demand entertainment sensation.